The filter is running, but the water still is not clear. Before adding another dose, establish what is not working: water treatment, particle removal or circulation.
Do not use the hot tub while the water is cloudy or treatment readings are outside the required limits. A clarifier can change the water’s appearance without resolving its hygiene.
Start with two measurements, not an assumption
Measure pH and sanitiser using a test suitable for your system. Follow the test’s reading time and check its expiry date. Smell is not a chlorine test.
As a public health reference, the CDC specifies a hot tub pH of 7.0–7.8, at least 3 ppm free chlorine or 4–8 ppm bromine. These are not dosing instructions: the hot tub materials and product label may require a narrower range. Other treatment systems use their own tests and limits.
High pH reduces chlorine’s effectiveness. If pH is outside the range, repeatedly adding chlorine without measurements is not a solution. Adjust as instructed, allow the required circulation time and test again.
What does the timing of the cloudiness tell you?
| What you notice | What to check first |
|---|---|
| The water became cloudy after several bathers | Sanitiser, pH and filter loading |
| Filtration flow fell at the same time | The cartridge, prefilter and water path |
| The water is milky and deposits appear on surfaces | The pH and hardness of the filling water |
| The water is coloured immediately after filling | The water source; well water may need analysis |
These are starting points, not diagnoses based on colour. Whitish water, for example, can have several causes; appearance alone does not show which product is missing.

The filter is running. Does that mean it disinfects too?
No. The filter traps particles, while chemical treatment has a different role. The reverse is also true: a good sanitiser reading does not remove leaves, dust and residues from the water.
Check for return flow and confirm that the filtration cycle is actually running. Clean the filter only using its specified procedure. If flow is weak, see the filtration checks in order.
Can I add clarifier or flocculant?
Only if the product is compatible with the hot tub and filter medium. Not every swimming pool product is suitable for a spa cartridge. Check compatibility before buying, then follow the dose and waiting time on the label. Do not mix concentrated products.
When is it worth changing the water?
If you do not know the treatment history, the problem returns after correction, or the water smells unusual and surfaces are slippery, stop using the tub and ask for cleaning advice. Changing the water without cleaning the shell, filter and system as instructed may leave the cause in place.
For a wood-fired hot tub, do not start draining until the fire and embers are completely out, as required by the manual. You can also read the guide to changing the water.
Need help? Send the NOMAD team the measured readings, product used, water volume and a photo of the filter. These are more useful than saying ‘I have already added chlorine’.
Sources: CDC — water testing and treatment; CDC — hot tub control readings; documentation on filtration and water hygiene. The photos illustrate the equipment, not a case of contaminated water.



