01Before the first session
This handbook covers indoor and outdoor NOMAD saunas in different cabin shapes. Read it alongside the instructions supplied with the stove or infrared panels. Heater position, sensors, ventilation and electrical connections must be checked for the actual installation, rather than inferred from the cabin's appearance.
Positioning and commissioning
The cabin needs a level, stable base capable of carrying it and its users. An outdoor installation must allow drainage and ventilation beneath the structure. Indoors, follow the requirements of both the cabin and the room that houses it.
Check the benches, door and glass before use. The exit must remain clear and the door must open from inside. Do not use a cabin with an unstable bench, cracked glass or a sticking door. Have an electrician check the heater supply and protective devices; the lighting circuit or an improvised extension lead is not a substitute for the correct supply.
Carry out the initial heating and airing procedure specified for the heater, with the cabin unoccupied if required. Different heaters may need different commissioning procedures.
⚠A safe and comfortable session
Before heating, remove towels and other objects from the heater and its surroundings and keep ventilation openings clear. Never use the sauna to dry clothes. Check heater stones only when cold and with the supply isolated.
Shower, dry yourself and place a towel on the bench. Take breaks and drink water rather than trying to reach a fixed time or temperature at any cost. Leave immediately if you feel dizzy or unwell, and cool down gradually. Avoid alcohol and do not stay alone if you may need assistance.
Supervise children and keep them away from hot surfaces. Ask a healthcare professional before use if pregnancy, a health condition or medication could affect your tolerance of heat.
02Starting and finishing a session
1. Prepare the cabin
Check the floor, benches, door and glass, then clear the exit and the heater area. Look for damage to guards, grilles and sensors without moving them. Leave every ventilation opening unobstructed.
2. Check the heater
On a stone heater, inspect the stones and their arrangement while cold and with the supply isolated. For a wood stove, check the firebox, flue and draught; do not light it if smoke cannot escape correctly. Keep infrared panels uncovered and observe their required distances. Do not start damaged equipment.
3. Allow the cabin to warm up
Choose the operating mode, temperature and timer at the heater controls. After installation or servicing, complete the specified test procedure before normal use. Warm-up time varies with the equipment and cabin conditions, so follow the thermometer and display. With wood firing, attend the fire and keep within the allowed fuel load instead of overfiring to speed things up.
4. Use the sauna within your comfort level
Keep clear of the heater and hot surfaces and use a towel on the bench. Where the stove permits water on stones, use only the allowed quantities and keep others clear of the steam. Never splash the controls or infrared panels. Take a break and rehydrate when needed; leave if uncomfortable even if you have not reached your intended session length.
5. Switch off and allow the cabin to dry
Stop the heater at its controls and let any required automatic cooling cycle finish. Stop adding wood and supervise the fire as it dies out. Do not remove hot ash or put objects on the heater after switching off: it remains hot. Once the cabin has cooled, wipe up moisture and ventilate until the timber dries.
03Using your heating system
Electric stone heaters
Use the stone type, size and quantity specified for the heater and arrange them as instructed. Do not pack them tightly or block airflow. Never operate a heater without stones if it requires them, move its sensors or cover it.
Set temperature and time using the installed control panel. Use delayed or remote starting only on an installation equipped for it. Before activating it, personally check that the cabin and heater are clear and the required safety systems are working.
Wood-burning stoves
Inspect the stove, flue and draught before lighting. Burn dry wood with suitable firelighters, never petrol, alcohol, waste or treated timber. Keep within the permitted fuel load and attend the fire. Use hand protection and open the firebox door carefully.
If smoke enters the cabin or an unusual burning smell develops, leave and stop the session until the stove, flue and ventilation have been checked. Follow the instructions for any water tank: do not heat it empty where this is prohibited, do not assume its water is safe to touch, and drain it before frost.
⚠Adding water to stones
Add water only where the heater permits it, and only onto the stones intended to produce steam. Use clean water in the stated quantities without splashing controls, connections or people. Never use salt water or pour concentrated oils or fragrances straight onto stones. Use scents only if permitted, diluted as their label directs.
Infrared and combined cabins
Use the infrared cabin's own controls and observe its specified temperature, time and distances. Never cover emitters or pour water onto panels or electrical components. Steam instructions do not apply to infrared panels.
Run two heating systems together only if the product is designed for that mode. A combined sauna-and-tub installation still needs separate checks of each component's supply, drainage and maintenance requirements.
04Caring for the sauna
After each session
Remove towels and containers and let the cabin cool. Wipe benches and touched surfaces with a soft cloth and a cleaner intended for sauna timber, following its rinsing or wiping instructions. Ventilate until dry without soaking the wood or directing water jets towards the heater, lights or controls.
Avoid solvents, abrasive tools and ordinary indoor varnish, paint or oil. Apply a sauna treatment only to surfaces it is intended for. Isolate power when cleaning near equipment and do not flood a floor that has no suitable drain.
Periodic checks
Inspect benches, accessible fixings, hinges, handles, seals and glass, including places that stay damp. Do not overtighten glass fixings. Remove dust and debris near the heater only when it is cold and electrically isolated, without dismantling electrical parts.
Remove broken stones and rearrange or replace the remainder at the intervals and in the manner required by the heater and its level of use. With a wood stove, remove ash only when fully cold and place it in a safe metal container. Have a competent person check and clean the stove, flue and connections. Frequency depends on use, fuel, deposits and local requirements, not just how clean the outside looks.
Outdoor cabins and winter
Inspect roofing, joints, drainage and the timber finish. Treat exterior surfaces with a compatible product, keeping it off interior benches and walls unless expressly suitable there. Do not climb onto a roof not designed for access; arrange a method of removing accumulations suitable for the structure. Before frost, drain any fitted water tank, shower and pipes after cooling, using their instructions.
05Stopping use and finding a fault
⚠Smoke, overheating or damage
Stop the session if smoke enters the cabin, an unusual burning smell develops, heating becomes uncontrolled or electrical protection trips repeatedly. Do the same for cracked glass, a blocked door or an unstable bench. Keep people clear of the danger and isolate the electrical supply only from a safe position. Stop adding fuel to a wood stove.
If carbon monoxide is suspected, go straight into fresh air and do not re-enter to investigate the stove. Call 112 for a fire or medical emergency. Do not use the sauna again until the cause is identified and a competent person has checked it. Never bypass sensors or repeatedly reset protection. A detector does not replace correct installation, ventilation and maintenance.
Checks that do not require dismantling
| Symptom | Safe checks |
|---|
| No heat | Check settings, timer and controller message. Do not open electrical panels or bypass protection. |
| Poor heating | Check the door, ventilation settings and stone arrangement. Do not close vents by guesswork. |
| Smoke in the cabin | Leave and stop the session. Have the stove, flue and draught checked before reuse. |
| Tripping protection or burning smell | Stop use and isolate power if safe. Do not keep resetting protection; arrange an inspection. |
| Sticking door, cracked glass or loose bench | Stop using the sauna until repaired. Do not force glass or improvise a repair. |
Information for the service team
Send photographs of the cabin, heater or controller label and any error message. Explain when the fault occurs and whether anything changed or was serviced beforehand. Do not force glass or the door, or improvise a repair to continue the session.
06Models and reference dimensions
Names such as Butoi, Cub, Box, Relax and Combi identify cabin shape and layout. Overall length may include a terrace or changing room rather than only the heated space. The table records catalogue configurations; use the order documents for a customised cabin or a different generation.
| Configuration | External dimensions | Weight and layout |
|---|
| Butoi 2 m | L 200 cm; Ø237 cm | 600 kg; 1 room |
| Butoi 2.5 m | L 250 cm; Ø237 cm | 700 kg; 1 room |
| Butoi 3 m with terrace | L 300 cm; Ø237 cm | 800 kg; sauna and terrace |
| Butoi 3 m Relax | L 300 cm; Ø237 cm | 900 kg; 2 rooms |
| Cub 2 m | 200 × 236 × 246 cm | 600 kg; 1 room |
| Cub 3 m with terrace | 300 × 236 × 246 cm | 900 kg; sauna and terrace |
| Cub 3 m Relax | 300 × 236 × 246 cm | 1,000 kg; 2 rooms |
| Cub 3.5 m Relax | 350 × 236 × 246 cm | 1,200 kg; 2 rooms |
| Cub 4 m Relax | 400 × 236 × 246 cm | 1,400 kg; 2 rooms |
| Cub 5 m Relax | 500 × 236 × 246 cm | 1,600 kg; 2 rooms |
| Cub Wide Relax | 400 × 240 × 237 cm | 1,400 kg; 2 rooms |
| M Box | 210 × 200 × 245 cm | 600 kg; 1 room |
| L Box | 250 × 200 × 245 cm | 800 kg; 1 room |
Reading the dimensions
Rectangular dimensions are length × width × height; Ø indicates the outside diameter of a Butoi barrel cabin. The flue, externally loaded firebox, steps and required guards may need extra space beyond the stated envelope.
For interior reference, Butoi 2 m is 180 cm long with a 226 cm diameter, while Cub 2 m is approximately 180 × 226 × 220 cm inside. Heater sizing is not simply a matter of multiplying these dimensions: cabin shape, glazing and uninsulated surfaces affect the heating requirement.
07TAVO, combined units and options
Reference specification: TAVO 240
| Feature | TAVO 240 reference |
|---|
| External footprint | 240 × 240 cm |
| Sauna interior | 228 × 228 cm |
| External height, front / rear | 250 / 230 cm |
| Internal height, front / rear | 225 / 209 cm |
| Approximate weight | 1,000 kg |
| Base-version walls and cladding | 40 × 95 mm spruce frame; 18 mm W-profile cladding |
| Roof covering | PVC membrane |
| Glazing | 6 mm toughened-glass door; 10 mm window, 185 × 195 cm |
| Benches and lighting | Two levels of thermally modified timber benches, backrests and integrated LEDs |
Versions with a changing room, terrace or both have a different footprint and weight. Check the ordered configuration for orientation, glazing and equipment. The 240 × 240 cm version's figures do not automatically describe a longer cabin.
Sauna-and-tub combinations
Catalogue Cub Combi versions are 400, 500 or 540 cm long, 230 cm wide and 246 cm high. Reference structural weights are approximately 1,400, 1,600 and 1,700 kg respectively. When checking the base, add the tub, water and any other components excluded from the structural weight.
Installation points that depend on the options
An externally loaded stove, Wi-Fi controller, tank, shower or terrace changes what the installation needs. Lights or a fitted socket do not establish that the heater supply has been installed. Ventilation, sensors, the flue route and safety clearances must follow the equipment documents rather than catalogue photographs.
If the sauna is supplied as a kit, assemble it using the kit plans. This handbook covers use after assembly and does not replace the assembly instructions.
08Warranty and service
Statutory consumer rights
For consumer purchases governed by Romanian law, the seller is responsible for a lack of conformity present at delivery and identified within two years. The consumer may seek repair or replacement, subject to the law's conditions and exceptions. Romanian law provides for replacement where a lack of conformity is found shortly after delivery, within 30 calendar days.
Repair or replacement must be free of charge, including necessary transport and labour, and without significant inconvenience. The period is agreed in writing and must not exceed 15 calendar days from notification to the seller. Price reduction, termination and remedies for hidden defects remain available where the law provides. This summary does not displace mandatory rights that apply to a sale in another country.
Commercial warranty
The warranty certificate and applicable offer identify the commercial warranty's provider, duration and scope. This warranty is separate from statutory consumer rights and does not limit them. Business purchases follow the legal and contractual arrangements applicable to that purchase.
Normal wear and natural changes in timber are not in themselves manufacturing defects. Cracks affecting strength, safety or function still need assessment. Damage involving frost, dry heating, incompatible chemicals or alterations is assessed against its cause; it does not automatically cancel every warranty right. Nor does this handbook transfer responsibility to the customer for an installation the seller was responsible for or for deficient instructions.
Requesting support
Stop using the product first if there is a safety risk. Email [email protected] with the product details, when the fault started and its symptoms. Include photographs, the equipment label, error code and proof of purchase where available. Keep affected parts and avoid work that could worsen the damage. NOMAD will coordinate assessment and any necessary transport with you; do not dispatch the product before arranging it with us.
Keep the invoice, warranty certificate and product documents. This handbook is not a warranty certificate. References for the Romanian consumer-law summary: Emergency Ordinance 140/2021, Articles 7 and 9-15, and Law 193/2000, as applicable.
09Scope and responsibilities
Applying the right instructions
This handbook covers several product families and options, including configurations absent from the tables. Describing an accessory does not mean it is included in every order. Identify the fitted equipment from its labels and delivery documents, and use its instructions for voltage, power, filling level, flow, safety clearances and controls.
Keep within the limits of the complete installation. If instructions are missing or conflict, obtain clarification before starting. Catalogue dimensions, capacities, weights and illustrations do not replace measuring the actual product, assessing its base, designing the installation or following its assembly and conformity documents. Leave identification and warning labels in place.
Intended use and health
Use a tub, spa, cold plunge or sauna only for the purpose for which it was supplied. It is not a medical device, and this handbook makes no claim to prevent or treat disease. Individual tolerance of heat and cold varies. Seek medical advice where pregnancy, health or medication could affect use, and stop if you become uncomfortable.
Rental and public use
The handbook does not authorise commercial operation. The operator must establish that the product and installation suit the proposed use and arrange supervision, hygiene, water testing where relevant, access and maintenance to meet applicable requirements. Give users the relevant rules and keep the necessary inspection and maintenance records.
Documents and rights
Warnings explain risks and correct operation. They do not ask customers to waive rights or exclude liability that cannot legally be limited, including liability for injury or defective products. Reading or downloading the handbook, or using the product, does not amount to accepting unlawful terms.
Keep the order conditions and warranty certificate separately. A later online edition does not reduce rights attached to an earlier purchase. Save a copy for offline use and pass it to the next user with the equipment instructions. For clarification, contact [email protected].