You've found a sauna you like, but the heater output makes you think about the bill. What does an evening in the sauna cost?

Cost is calculated from energy used over the entire session, including preheating. Heater output is a starting point, not the final cost.

What's the difference between kW and kWh?

kW expresses power; kWh expresses energy used over time. A 6 kW heater running at full output for one hour uses 6 kWh. Two hours under the same conditions would mean 12 kWh.

Once the set temperature is reached, the thermostat switches the elements on and off. You therefore can't assume continuous operation at full output.

Electric sauna heater with stones

A worked example

A hypothetical 6 kW heater running at full output for one hour uses 6 kWh. If the elements run for another 30 minutes in total during the next hour, the total is 9 kWh. This is a calculation scenario, not a measurement or consumption promise.

Cabin volume, insulation, glazing, ventilation and chosen temperature affect the result. An outdoor sauna on a cold evening cannot be compared with one inside a heated home without further detail.

What does that mean in lei?

Multiply the kWh used by the final unit price in your contract. For the hypothetical 9 kWh example, at 1 leu/kWh the cost is 9 lei, and at 1.50 lei/kWh it is 13.50 lei.

These tariffs are calculation examples, not current energy offers. Add any other equipment and consumption to calculate the complete session cost.

How do you avoid unnecessary consumption?

Plan to enter when the sauna is ready. Don't leave it running for a long time before deciding to use it. Choose a heater suited to the cabin and maintain the stones according to the manual. Don't block ventilation to save energy.

For a real measurement, ask an electrician for a solution suited to the circuit. Don't connect a high-output heater to an arbitrarily chosen plug-in energy meter.

Do I need three-phase power?

It depends on the heater and the connection arrangement permitted by the manufacturer. Before ordering, check voltage, available power and circuit requirements with an electrician.

Comparing options for home? See NOMAD saunas and request information about your chosen equipment.